Nissan Vics Dm305a Pw705 Owners Manual EXCLUSIVE
Download File >>> https://urlin.us/2tuJnM
How to Use the Nissan Vics Dm305a Pw705 CD and DVD Navigation System
The Nissan Vics Dm305a Pw705 is a 2DIN (width 180mm) CD and DVD navigation system that can be installed in some Nissan and Toyota cars. It has a touch panel, an amplifier, a radio tuner, a VICS (Vehicle Information and Communication System) receiver, and a DVD map ROM slot. It can play music CDs, FM/AM radio, and DVD navigation maps. However, it cannot display TV broadcasts because it has an analog tuner.
This article will explain how to use the basic functions of the Nissan Vics Dm305a Pw705 system. For more details, please refer to the owner's manual that came with the system or contact the manufacturer (Matsushita Electric Industrial Co., Ltd.)[^1^].
How to Turn On and Off the System
To turn on the system, press the POWER button on the lower left corner of the panel. The panel will open and reveal the CD and DVD slots. To turn off the system, press the POWER button again. The panel will close and hide the slots.
How to Adjust the Volume and Sound Quality
To adjust the volume, use the rotary knob on the lower right corner of the panel. To mute the sound, press the MUTE button next to the knob. To adjust the sound quality, press the SOUND button on the upper right corner of the panel. You can choose from four preset modes: FLAT, ROCK, POP, or VOCAL. You can also customize the bass, treble, balance, and fader settings by using the touch panel.
How to Play Music CDs
To play music CDs, insert a CD into the upper slot on the panel. The system will automatically start playing the CD. You can use the touch panel to select tracks, fast forward, rewind, pause, or stop. You can also use the buttons on the lower part of the panel to perform these functions. To eject a CD, press the EJECT button next to the upper slot.
How to Listen to FM/AM Radio
To listen to FM/AM radio, press the RADIO button on the upper left corner of the panel. The system will switch to radio mode and display the frequency and station name on the screen. You can use the touch panel to tune in to your desired station manually or automatically. You can also use the buttons on the lower part of the panel to perform these functions. To store your favorite stations in memory, press and hold one of the six preset buttons (P1-P6) on
the lower part of the panel.
How to Use DVD Navigation
To use DVD navigation, insert a DVD map ROM into the lower slot on
the panel. The system will automatically start reading
the map data and display it on
the screen. You can use
the touch panel to enter your destination,
search for points of interest,
view route guidance,
zoom in or out,
or change
the map orientation.
You can also use
the buttons on
the lower part of
the panel to perform these functions.
To eject a DVD map ROM,
press
the EJECT button next
to
the lower slot.
How to Use VICS
VICS is a service that provides real-time traffic information in Japan. To use VICS, you need to connect an antenna (not included) to
the system and subscribe
to
the service. To activate VICS,
press
the VICS button on
the upper part of
the panel. The system will display
the traffic information on
the map screen. You can use
the touch panel to change
the display mode,
view detailed information,
or update
the data.
You can also use
the buttons on
the lower part of
the panel to perform these functions.
Troubleshooting
If you encounter any problems with
the system,
please check
the following points before contacting
the manufacturer or dealer:
Make sure
the system is properly connected
to
the power source and speakers ec8f644aee